Riveter
Engineering-assembly design system

Assemble it
like steel.

Riveter takes the constructivist brief off the wall and onto the slipway. Plates bolt along a rising diagonal, the red wedge bears the load, and every figure is torqued onto the axis. An interface built, not decorated.

01

The brief was Bauhaus order. Riveter answers with the workshop, not the gallery — Rodchenko's diagonal force and riveted plate, where structure is the ornament and the red axis does the lifting.

02

Three load paths

— A1

Diagonal axis

Nothing sits centred. Content rises on a single load line; the eye climbs the structure from lower-left to the upper joint.

— A2

Bolted plates

Panels are steel, riveted at the corners. They assemble against each other — overlapping, staggered — never floating as soft cards.

— A3

Torque colour

Red is load, blue is routing, yellow is a flag. Three primaries on ink, applied like a torque wrench — exactly where force is.

Plates set on axis
148
across 4 active gantries
Load axis
-32°
single rising sightline
Primaries in play
03
red · blue · yellow, no more

Bolt the next plate
onto the red axis.

Open Riveter in the studio and start assembling. The grid is already torqued to spec.