Formwork
Béton brut · dark cast

RAW
STRUCTURE,
MEASURED

A design language poured into its mold and left there. Every surface is a load-bearing bay, framed by datum lines and dimension brackets — never a floating card, never a soft shadow.

01

Built like formwork

|1440|A-0

Measured, not floated

Surfaces are defined by where the structure lands — a top datum rule, end ticks, a dimension label — not by a drop shadow underneath them.

|980|A-1

Board-marked ground

The dark concrete ground carries the faint plank ruling of the formwork mold, so the page reads as cast material, not a blank canvas.

|720|A-2

Rebar binds the column

A dashed orange spine runs the height of every stacked group like exposed reinforcement, tying the bays into one structural run.

02

The pour spec

01

Datum-line surfaces

Every panel is dimensioned. The cyan tick is the measure, the orange is load, the yellow is annotation.

SIGNATURE
02

Condensed industrial type

Saira Condensed shouts the headers; Inter carries the body; Spline Sans Mono reads the measurements.

TYPE
03

Three site colours

Safety orange, datum cyan, hazard yellow — used like paint sprayed on raw concrete, never washes.

PALETTE
04

No floating, no soft edges

Hard formwork corners. Structure is carried by lines and load, so it reads at a distance.

RULE

Strike the forms

Pour a project · cure it on datum · ship raw

Start a pour